Kingston Technology ValueRAM 8GB DDR4 2666MHz 8GB DRAM 2666MHz memory module

Kingston KVR26N19S8/8 8GB DDR4-2666MHZ NON-ECC CL19 DIMM 1RX8 ::

MPN: KVR26N19S8/8Kingston
Videos & images may be added by customers.
Please check the specifications
Kingston KVR26N19S8/8
Product Image
Product Image
Product Image
Product Image

Kingston Technology ValueRAM 8GB DDR4 2666MHz 8GB DRAM 2666MHz memory module

Kingston KVR26N19S8/8 8GB DDR4-2666MHZ NON-ECC CL19 DIMM 1RX8 ::
MPN: KVR26N19S8/8Kingston

In Stock

Order now to avoid disappointment
Same day despatch when ordered before 4pm Mon - Fri
Delivery Options

5 Working Days FREE
2 Working Days £3.98
3 Working Days £2.99
Next Working Day £7.99
More delivery info
Consumers may return unwanted items within 14 days of delivery.
Faulty items can be returned within 30 days of delivery.

Returns can be processed online or you can contact our customer service team. For more information see our returns section
was £59.89 SAVE 41%
£29.36 ex. VAT

Wishlist addFavourite
Spread the cost with PayPal Credit


This document describes ValueRAM's KVR26N19S8/8 is a 1G x 64-bit (8GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx8, memory module, based on eight 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of
19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:

- Power Supply: VDD=1.2V Typical
- VDDQ = 1.2V Typical
- VPP - 2.5V Typical
- VDDSPD=2.2V to 3.6V
- Nominal and dynamic on-die termination (ODT) for
- data, strobe, and mask signals
- Low-power auto self refresh (LPASR)
- Data bus inversion (DBI) for data bus
- On-die VREFDQ generation and calibration
- Single-rank
- On-board I2 serial presence-detect (SPD) EEPROM
- 16 internal banks; 4 groups of 4 banks each
- Fixed burst chop (BC) of 4 and burst length (BL) of 8
- via the mode register set (MRS)
- Selectable BC4 or BL8 on-the-fly (OTF)
- Fly-by topology
- Terminated control command and address bus
- PCB: Height 1.23” (31.25mm)
- RoHS Compliant and Halogen-Free


Technical Description: Kingston 8GB DDR4-2666MHZ NON-ECC CL19 DIMM 1RX8 :: KVR26N19S8/8 (Components > Memory)

RoHS compliance:The Restriction of Hazardous Substances (RoHS) Directive aims to restrict certain dangerous substances commonly used in electrical and electronic equipment. Any RoHS compliant product is tested for the presence of Lead (Pb), Cadmium (Cd), Mercury (Hg), Hexavalent chromium (Hex-Cr), Polybrominated biphenyls (PBB), and Polybrominated diphenyl ethers (PBDE). PBB and PBDE are flame retardants used in several plastics. For Cadmium and Hexavalent chromium, there must be less than 0.01% of the substance by weight at raw homogeneous materials level. For Lead, PBB, and PBDE, there must be no more than 0.1% of the material, when calculated by weight at raw homogeneous materials. Any RoHS compliant component must have 100 ppm or less of mercury and the mercury must not have been intentionally added to the component. In the EU, some military and medical equipment are exempt from RoHS compliance.
Colour of product:The colour e.g. red, blue, green, black, white.
Halogen free:
Cooling type:The method used to cool the device or to cool the air around the device.

Memory ranking:
Unbuffered memory:
SPD profile:
Row active time:
32 ns
Refresh row cycle time:
350 ns
Row cycle time:
45.75 ns
Module configuration:
1024M x 64
Lead plating:
ECC:ECC means Error Correction Code, and it is memory that is able to detect and correct some memory errors without user intervention.
Memory voltage:The voltage (V) of the memory in the device.
1.2 V
CAS latency:Column Address Strobe (CAS) latency, or CL, is the delay time between the moment a memory controller tells the memory module to access a particular memory column on a RAM module, and the moment the data from the given array location is available on the module's output pins. In general, the lower the CAS latency, the better.
Memory layout (modules x size):
1 x 8 GB
Memory form factor:Design of the memory e.g. 240-pin DIMM, SO-DIMM.
288-pin DIMM
Component for:What this product is used as a part of (component for).
Memory clock speed:The frequency at which the memory (e.g. RAM) runs.
2666 MHz
Internal memory type:The type of internal memory such as RAM, GDDR5.
Internal memory:A computer's memory which is directly accessible to the CPU.
8 GB

Operational conditions
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-55 - 100 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 85 °C

System requirements
Linux operating systems supported:8 RT. Linux (9.4, 9.5), Red Hat Enterprise Linux 5.0 (supported with a pre-built package); SUSE Linux (10.3, 11.0, 11, 11.1, 11.2), Fedora (9, 9.0, 10, 10.0, 11.0, 11, 12, 12.0), Ubuntu (8.04, 8.04.1, 8.04.2, 8.10, 9.04, 9.10, 10.04), Debian (5.0, 5.0.1, 5.0.2, 5.0.3)
Mac operating systems supported:Mac operating systems e.g. OS X can be used with the device.
Windows operating systems supported:Windows vesions wich can be used with the device.

Weight & dimensions
Height:The measurement of the product from head to foot or from base to top.
31.2 mm
Width:The measurement or extent of something from side to side.
133.3 mm

Technical Advice

Tel: 01932 738 888

Product details

KVR26N19S8/8 Kingston 0740617270907 B072QYHKLR

Kingston 8GB DDR4-2666MHZ NON-ECC CL19 DIMM 1RX8 :: KVR26N19S8/8 (Components > Memory)

£35.23 and In stock


Email me for later Close Email me for later Open
Email me a link to this page for later
Note: Your email address will not be used for any other purpose
< Close
Cookies help us deliver the best experience on our website. By using our website, you agree to our use of cookies

This site uses cookies. Some of these cookies are essential, while others help us to improve your experience by providing insights into how the site is being used. Read more about our privacy policy.

Some necessary cookies enable core functionality. The website cannot function properly without these cookies, and can only be disabled by changing your browser preferences.
Analytical and Functional cookies
Analytical cookies for us to better craft the user experience based on your page view experiences.
Social and Chat Cookies
We use some social sharing plugins. These plugins may place cookies on your device.